Sunday, August 14, 2011

View your webcam on Window 7

Download the WebcamViewer V1.0.zip
http://www.bustatech.com/webcamviewer-a-simple-viewer-for-webcam/

Print Friendly and PDF
Share/Bookmark

How to transfer Lotus notes 7.0 contact to MS outlook 2007 by using freeware

Step 1:

Go to “Address book”, you will see your contact list.

clip_image002

Step 2:

Click “File” -> “ Export”

clip_image002[8]

Step 3:

Enter a “file name”, select “vCard 3.0” and then press “Export”

image

Step 4:

Select “All documents” and “All fields”, then press “OK”

image

Step 5:

Download the “Open Contacts” from the following link:

http://www.fonlow.com/opencontacts/download/oc6portable.zip

clip_image002[11]

Step 6:

Unzip the oc6portable.zip and run the “Open Contacts.exe”

clip_image002[13]

Step 7:

Click “Tools” import

clip_image002[15]

Step 8:

Click “vCard”, select “Each file contains multiple vCards”, then click “import”

clip_image002[17]

Step 9:

Select the file which is you export from Lotus notes:

image

Step 10:

You will see a screen the following and press “OK”

clip_image002[19]

Step 11:

Press “Apply”

clip_image002[21]

Step 12:

Press “Close” to exit the import

clip_image002[23]

Step 13:

Select all the contact in the “People”

clip_image002[25]

Step 14:

Select “Output” -> “export to vCard”

clip_image002[27]

Step 15:

Find the location to save those file and press “OK”

image

Step 16:

Open MS Outlook and go to “Contacts”

clip_image002[29]

Step 17:

Select all the “.vcf” files and “pull and drop” to the outlook contact

image

Step 18:

You will see a lot of pop up screen like this, just press “Save & close” to close all of them.

clip_image002[31]

Step 19:

Finally, you will have been migrate all your contact from Lotus notes to MS outlook

Print Friendly and PDF
Share/Bookmark

WOL by PME

PME is Power Management Event

WOL is Wake Up on LAN

 

If you want to enable WOL from a Mainboard which is support WOL by PME, you need to go to BIOS -> Power -> APM Configuration –> “Power on by PCI/PCIE device” or “Power on by PME” or “Power on by LAN”

Remark:

APCI must be enable
APCI mode is S1 or S3 (APCI 1.0)

Print Friendly and PDF
Share/Bookmark